PRECISION BARRELS FOR OVER 50 YEARS  
  
 
 
 
 

PALMA BARRELS

 

Price for this service is $425.00 plus postage. We will Rockwell check your action and if found not suitable, advise you before starting work. We will supply you with a barrel of your choice of size from our standard shapes FWT through Benchrester. The barrel will be of our chrome moly air gaged, premium quality. Barrel will be fit, headspaced and proof tested in those calibers where proof cartridges are available. If proof cartridge is not available, we will fire a new factory cartridge or hand load assembled into new brass to maximum loads. Every effort will be made to assure highest quality material and workmanship. Barrels will be supplied in the white - NO BLUING. All barrels fit in our shop will be branded with caliber, G. R. DOUGLAS and XX premium grade stamp.  Add $20.00 for .17 caliber. Stainless $68.00 extra.

 


PALMA

Rough Turned to Approx. Size (PRET)

Finished Turned & Polished (FT)

Turned, Threaded Chambered, Cut to Length, Crowned & Polished (FTC)

 

275.00

285.00

345.00

Palma

ADD $68.00 FOR STAINLESS

 

BARREL FITTING SERVICES

We will fit barrels to SUITABLE bolt actions.

Price for this service is $460.00 plus postage. We will Rockwell check your action and if found not suitable, advise you before starting work. We will supply you with a barrel of your choice of size from our standard shapes FWT through Benchrester. The barrel will be of our chrome moly air gaged, premium quality. Barrel will be fit, headspaced and proof tested in those calibers where proof cartridges are available. If proof cartridge is not available, we will fire a new factory cartridge or hand load assembled into new brass to maximum loads. Every effort will be made to assure highest quality material and workmanship. Barrels will be supplied in the white - NO BLUING. All barrels fit in our shop will be branded with caliber, G.R. DOUGLAS and XX premium grade stamp. Add $20.00 for .17 caliber. Stainless $68.00 extra.

Should your action require that the bolt face be opened to accept magnum head diameter cartridges, there will be an addi­tional $25.00 charge. WE DO NOT INSTALL SIGHTS OR MAKE ALTERATIONS TO THE MAGAZINE to insure the cartridge feeding. This is your responsibility. Should you wish an old barrel to be duplicated, we can probably do this for you, depending on barrel shape wished. Price is $50.00 additional.

We cannot guarantee we will not scratch the blue on your action. Every effort is made to prevent this, but it sometimes happens.

CLEANING INSTRUCTIONS

Run 2 or 3 wet patches with a good bore cleaner through the barrel.  Then use a brass brush and wet patch again.  When sighting in, clean every 10-15 shots.  Always leave cleaner in bore when you are finished shooting.  This will dissolve fouling left in barrel.  The barrel should be thoroughly dried before shooting.  If Sweets is used, do not leave in barrel more than 5 minutes.  Do not mix Sweets with any other cleaner.

Do not use stainless steel brushes or abrasive cleaners in barrel.

 

 

     
Copyright 2006 © Douglas Barrels Inc. All rights reserved.